Receiving Preset Stations; Usb/Iphone/Aux; Playing Back; Usb Devices (Including Android™)/Iphone - Pioneer MVH-S300BT Manual De Instrucciones

Receiving preset stations

1
Press SRC/OFF to select [RADIO].
2
Press BAND/ to select the band from [FM1], [FM2], [FM3] or [AM].
3
Press a number button (1/
NOTE
You can select a preset channel by pressing
TIP
The / buttons can be also used to select a preset station when [SEEK] is set to
[PCH] in the FUNCTION settings (page 18).

Best stations memory (BSM)

The six strongest stations are stored on the number buttons (1/
1
After selecting the band, press the M.C. dial to display the main menu.
2
Turn the M.C. dial to select [FUNCTION], then press to confirm.
3
Turn the M.C. dial to select [BSM], then press to confirm.
To seek a station manually
1
After selecting the band, press
Press and hold / then release to seek an available station.
Scanning stops when the unit receives a station. To cancel seek tuning,
press / .
NOTE
[SEEK] needs to be set to [MAN] in the FUNCTION settings (page 18).
To store stations manually
1
While receiving the station you want to store, press and hold one of the
number buttons (1/ to 6/
8
En
to 6/ ).
and turning the M.C. dial.
/ to select a station.
) until it stops flashing.
NOTE
You can select a preset channel by pressing
channel, press and hold the M.C. dial to store a station.

USB/iPhone/AUX

Playing back

Disconnect headphones from the device before connecting it to the unit.
USB devices (including Android™)/iPhone
1
Open the USB port cover.
2
Plug in the USB device/iPhone using an appropriate cable.
to 6/ ).
NOTE
To automatically switch to [USB] source when a USB device/iPhone is connected to the unit,
set [USB AUTO] to [ON] in the SYSTEM settings (page 21).
CAUTION
Use an optional Pioneer USB cable (CD-U50E) to connect the USB device as any device
connected directly to the unit will protrude out from the unit, which could be dangerous.
Before removing the device, stop playback.
AOA connections
For details on AOA connection, see page 16.
MTP connection
A device installed with Android OS 4.0 or later can be connected to the unit via MTP, using
the cable supplied with the device. However, depending on the connected device and the
numbers of the files in the device, audio files/songs may not be able to be played back via
MTP. Note that MTP connection is not compatible with WAV file formats and FLAC file
formats, and cannot be used with the MIXTRAX function.
NOTE
If you use an MTP connection, [PHONE CONNECT] needs to be set to [USB MTP] in the
SYSTEM settings (page 21).
and turning the M.C. dial. After selecting a