System Settings - Pioneer MVH-S300BT Manual De Instrucciones

Menu Item
SAVE SETTINGS
[YES], [NO]
LOAD SETTINGS
D.BASS
[OFF], [LOW], [HI]
LOUDNESS
[OFF], [LOW], [MID], [HI]
SLA
[+4] to [–4]
*1 Not available when [SUB.W/SUB.W] is selected in [SP-P/O MODE] in the INITIAL settings
(page 7).
*2 Not available when [REAR/REAR] is selected in [SP-P/O MODE] in the INITIAL settings
(page 7).
20
En
Description
Save to later recall the following sound
settings at their current values:
[CROSSOVER], [SPEAKER LEVEL], [EQ
SETTING], [POSITION], [TIME ALGNMNT],
[D.BASS], [SUBWOOFER].
Load the sound settings, when you have
already performed [SAVE SETTINGS].
Boost the bass level dynamically to offer an
effect as if a subwoofer was added to the
system.
Compensate for clear sound at low volume.
Adjust the volume level for each source
except FM.
Each of the below combinations are set to
the same setting automatically.
• When making a USB connection, set USB,
iPod, PANDORA, ANDROID, SPOTIFY, and
APP.
• When making a Bluetooth connection,
set BT AUDIO, iPod, PANDORA, ANDROID,
SPOTIFY, and APP.

SYSTEM settings

You can also access to these menus when the unit is turned off.
Menu Item
LANGUAGE
[ENG](English),
[ESP](Spanish), [FRA]
(Canadian French)
CLOCK SET
12H/24H
[12H], [24H]
BEEP TONE
[ON], [OFF]
INFO DISPLAY
[SOURCE/SPEANA], [CLOCK/
SPEANA], [SRC/LIVE FX],
[CLOCK/LIVE FX], [SOURCE],
[SPEANA], [OFF]
AUX
[ON], [OFF]
BT AUDIO
[ON], [OFF]
SPOTIFY
[ON], [OFF]
Description
Select the language to display the text
information from a compressed audio file.
Set the clock (page 7).
Select the time notation.
A beep can be heard when any button is
pushed. Select [OFF] to disable this
function.
Display the item on the sub information
display.
• When [SOURCE/SPEANA] or [CLOCK/
SPEANA] is selected, display the antenna
instead of the speana on the radio source.
Set to [ON] when using an auxiliary device
connected to the unit.
Set the Bluetooth signal on/off.
Set to [ON] when using the Spotify
function.