DeWalt D28474 Manual De Instrucciones página 6

643855-00,D28474,B3 10/3/06
.../min ............revolutions or reciprocation per minute
.................. earthing terminal
..................safety alert symbol
FAMILIARIZATION
Large Angle Grinders and Large Angle Sanders are designed for
heavy material removal in extended use applications. The following
grinders and sanders are described in this manual.
D28494W
D28476W
D28494M
D28496M
D28493P 7"/9" Angle Sander
D28474W
D284076 7"/9" Angle Grinder/Sander
Components
A. Trigger Switch
C. Spindle Lock
E. Spindle
G. Rubber Bumper
Features
SWITCH
The tool is controlled by a trigger switch (A). A lock-on button (B)
provides increased comfort in extended use applications.
ROTATING GEAR CASE (D28474, D28476, D284076, D28493,
D28494, D28496)
For applications in which a tool will be dedicated for uses in edge
grinding and finishing work, the gear case may be rotated 90° left
11:38 AM Page 4
7" Angle Grinder 6,500 rpm
7" Angle Grinder 8,500 rpm
9" Angle Grinder 6,500 rpm
9" Angle Grinder 6,500 rpm
5,000 rpm
7" Angle Grinder 8,500 rpm
6,500 rpm
B. Lock On Button
D. Side Handle
F. Soft Mount
A
E
F
D
or right of its original position. See page 8 for instructions on rotat-
ing the gear case.
MULTIPLE SIDE HANDLE POSITIONS
The side handle can be properly positioned in five locations based
on personal preference and application. The side handle must be
used at all times to maintain proper control of the tool.
RUBBER BUMPER
The gear case rubber bumper may wear with use. The bumper can
be replaced with part number 397711-00 available at extra cost
from D WALT authorized service centers. Replacement should be
E
performed by D WALT authorized service centers or qualified serv-
E
ice personnel.
SPINDLE LOCK
The spindle lock pin is provided to prevent the spindle from rotating
when installing or removing wheels. Operate the spindle lock pin
only when the tool is turned off and unplugged from the power
source. To engage the lock, depress the spindle lock button (C) and
rotate the spindle until you are unable to rotate it further.
4
G
C
B