Safety Devices On The Product - Husqvarna 115iPT4 Manual Del Usuario

• Use approved hearing protection.
• Use approved eye protection. If you use a visor, you
must also use approved protective goggles.
Approved protective goggles must agree with the
ANSI Z87.1 standard in the USA or EN 166 in EU
countries.
• Use gloves when it is necessary, for example when
you attach, examine or clean the cutting equipment.
• Use protective boots, or shoes, with non-slip soles.
• Use pants with saw protection.
• Use clothing made of a strong fabric. Always use
heavy, long pants and long sleeves. Do not use
loose clothing that can catch on twigs and branches.
Do not wear jewelry, short pants, open shoes or go
with bare feet. Put your hair up safely above your
shoulders.
• Keep first aid equipment close at hand.
707 - 003 - 04.03.2019

Safety devices on the product

WARNING: Read the warning instructions
that follow before you use the product.
In this section the product's safety features, its purpose
and how checks and maintenance should be carried out
to ensure that it operates correctly. See instructions
Product overview on page 2 to find
under the heading
where these parts are located on your product.
The life span of the product can be reduced and the risk
of accidents can increase if product maintenance is not
carried out correctly and if service and/or repairs are not
carried out professionally. If you need further information
please contact your nearest servicing dealer.
WARNING: Never use a product with
defective safety components. The product's
safety equipment must be inspected and
maintained as described in this section. If
your product fails any of these checks,
contact your service agent to get it repaired.
CAUTION: All servicing and repair work on
the machine requires special training. This is
especially true of the machine's safety
equipment. If your machine fails any of the
checks described below you must contact
your service agent. When you buy any of
our products we guarantee the availability of
professional repairs and service. If the
retailer who sells your machine is not a
servicing dealer, ask him for the address of
your nearest service agent.
To do a check of the keypad
1. Push and hold the start/stop button (A).
A
a) The product is on when the LED is on.
b) The product is off when the LED is off.
To start the SavE function on page 12 for
2. Refer to
the function of the SavE button (B).
Troubleshooting on page 19 if the warning
3. Refer to
indicator (C) is on or flashes.
C
B
7