Dvd/Video Cd/Cd Player; Playing A Disc - Sony MV-101 Manual De Instrucciones

DVD/Video CD/
CD Player
This chapter describes how to play a disc.
DISPLAY
1 2
Number
4 5
buttons
7 8
TOP MENU
MENU
M/m
</,
./>
/y
m/M
VOL

Playing a disc

1
Press (POWER) to turn on the player.
2
Open the front panel.
3
Insert the disc (labelled side up or the
surface you want to play down if the
disc is a DVD).
If a disc is already inserted, press u to start
playback.
Note
Even when the player is turned off, you can eject a
disc from the player, though you cannot insert a
disc.
POWER
POWER
SEARCH
SEARCH
3
CLEAR
6
9 0
SUBTITLE
ANGLE
ENTER
AUDIO
x
SETUP
u
MONITOR
INPUT POWER
To
Stop playback
Eject the disc
Pause
Resume playback
after pause
Go to the next chapter,
track, or scene in
continuous play mode
Go back to the preceding Press .
chapter, track, or scene in
continuous play mode
Fast forward
Fast reverse
Slow forward
(DVD/Video CD only)
Slow reverse
(DVD only)
1 If the resume playback function is activated, you
*
can resume playback later by pressing u. For
details, see "Resume playback."
2 DVD/Video CD
*
Both the picture and sound stop during pause
and "PAUSE" is displayed on the screen.
Audio CD
The sound stops and "PAUSE" is displayed on
the screen.
3 DVD/Video CD/Audio CD
*
Playback increases to 4 times the speed with
no sound.
4 A disc other than a DVD returns to normal
*
playback when a track/MP3 file finishes.
Notes
• Depending on the recording method used on the
disc, it may take a minute or more before
playing.
• Depending on the condition of the disc, it may
not play back (page 7).
• If you play a high-bit rate MP3 file such as 320
kbps, sound may be intermittent.
continue to next page t
Do this
Press x* 1
Open the front panel,
then press Z on the
player.
2
Press u *
Press u
Press >
Press M/y while
3 4
playing*
*
Press /m while
3 4
playing*
*
Press M/y in
pause* 4
Press /m in
pause
13