Usb Storage Device/Hdd; Basic Operations - Onkyo CS-N575D Manual De Instrucciones

> Before Start > Part Names

USB Storage Device/HDD

1
2
18
> Install > Initial Setup
You can play music files by connecting a USB storage
device or HDD (hard disk drive) to the USB port on the
front of the unit.

Basic operations

Perform the following procedure when the unit is on.
1. Repeatedly press INPUT 2/1 on the remote
controller to switch input to USB.
2. Plug your USB storage device or HDD into the USB
port on the front.
3. Press ENTER (e) after reading is complete.
4. Select the folder or music file with the cursors (c) of
the remote controller and press ENTER (e) to
confirm. To return to the previous display, press
(b).
0 Only the music files in the same level of the folder
are played.
5. Use play buttons (d) to stop play or choose tracks to
play.
0 Press (a) to display information such as album
art and file format. The display of album name,
artist name, and album art is supported with MP3/
WMA/Apple Lossless/FLAC/AAC format music
files. The formats for embedded images are JPEG
and PNG.
0 Characters that cannot be displayed by this unit
appear as "¢".
0 The USB port of this unit conforms with the USB
2.0 standard. The transfer speed may be
insufficient for some content you play, which may
cause some interruption in sound.
> Playback
Supplementary information | Advanced Setup | Others
a
c
f
b
d
e
d
g