Onkyo CS-N575D Manual De Instrucciones página 40

> Before Start > Part Names
∫ Tuner
FM Search Level You can choose to have only those FM stations with strong
(CS-N575D) reception selected when tuning into stations automatically if
tuning regularly stops on FM stations with weak reception.
"Normal" (Default Value)
"Strong": Select only stations with strong reception.
FM Frequency Step Select a frequency step depending on your area of
(CS-N575) residence.
"0.2MHz" (Default Value), "0.05MHz"
When this setting is changed, all radio presets are deleted.
DAB Scan You can run the auto scan when new DAB stations are
(CS-N575D) added or when you move house.
DAB DRC With the DRC (Dynamic Range Control) setting, you can
(CS-N575D) reduce the dynamic range of DAB digital radio so that you
can still hear quiet parts even when listening at low volume
levels - ideal for listening to the radio late at night when you
don't want to disturb anyone.
"0" (Default Value): DRC off
"1": Large reduction in dynamic range
"1/2": Small reduction in dynamic range
Preset Write This can be selected only when input is "FM" or "DAB".
Add the tuned station to the presets.
Preset Erase This can be selected only when input is "FM" or "DAB" and a
preset station is tuned.
Delete the tuned station from the presets.
Name Edit This can be selected only when input is "FM" and a preset
station is tuned.
You can give names to the stations that you have registered.
For details on how to enter text, refer to " Entering text"
( P36).
40
> Install > Initial Setup
∫ Bluetooth
> Playback
Supplementary information |
Bluetooth Select whether or not to use the BLUETOOTH function.
"On" (Default Value): Enables connection with a
BLUETOOTH wireless technology enabled device by using
the BLUETOOTH function. Select "On" also when making
various BLUETOOTH settings.
"Off": When not using the BLUETOOTH function
Auto Input Change The input of the unit will automatically be switched to
"BLUETOOTH" when connection is made from a
BLUETOOTH wireless technology enabled device to the
unit.
"On" (Default Value): The input will automatically become
"BLUETOOTH" when a BLUETOOTH wireless technology
enabled device is connected.
"Off": The function is disabled.
0 If the input is not switched automatically, set to "Off" and
change the input manually.
Auto Reconnect This function automatically reconnects to the BLUETOOTH
wireless technology enabled device connected last when
you change the input to "BLUETOOTH".
"On" (Default Value): When this function is to be used
"Off": When this function is not to be used
0 This may not work with some BLUETOOTH wireless
technology enabled devices.
Advanced Setup | Others