Onkyo CS-N575D Manual De Instrucciones página 35

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 104
> Before Start
> Part Names
"Wednesday", "Thursday", "Friday", or "Saturday"
and confirm.
7. Use 3/4 (b) to set the start time for the alarm, the
end time, and the volume (0 to 50) in turn, then
press ENTER (c) to confirm each selection.
0 The TIMER indicator lights when the settings are
complete, and the content you set is displayed on
the display.
8. Press Í (a) to switch the unit to standby.
0 The alarm does not work when this unit is on.
a
b
Check whether the alarm setting is On or Off: When
the TIMER indicator is on and red, the alarm is on. The
alarm is off if the indicator is off.
Turning the alarm setting On or Off: If the alarm is
already set, you can turn the function on or off.
1. Press
on the remote controller to display the
menu, press 3/4 (b) to select "Timer", then press
ENTER (c).
2. Press 3/4 (b) to select "Timer 1" or "Timer 2" and
press ENTER (c).
> Install
> Initial Setup
3. To turn off, press ENTER (c) when "Timer Off" is
displayed.
0 To turn on, press ENTER (c) when "Timer On" is
displayed.
0 Press 3/4 (b) to select "Timer Call", then press
ENTER (c) to check the content you set.
4. Press Í (a) to switch the unit to standby.
c
> Playback
Supplementary information | Advanced Setup | Others
35
En

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Cs-n575

Tabla de contenido