Parts Supplied For Installation; Electrical Requirements; Grounding Instructions - Whirlpool GCAM2792TQ0 Instrucciones De Instalación

Recessed area
instructions
lids washer may be installed in a
recessed area or closet.
The installation dimensions shown are
the minimum spaces allowable,
Additional spacing should be
considered for ease of installation
and servicing, If closet door is
installed, the minimum air openings in
top and bottom of door are required,
Louvered doors with air openings in
top and bottom are acceptable,
Companion appliance spacing
should be considered,
l_inim_ml installation spacing
closet door V
3"
48 sq. in.
(310 cm =)
O
3"
(7.6 cm)
17"
(43.2 cm)
*(0 cm) *(0cm)
48 sq. in.
(155 cm =)
(10.2 cm)
min.
_ I" (2.5 cm) min.
Tools needed for
installation:
level
i i flat-blade
screwdrivel
J
utility
knife sctssom
Parts supplied for
installation:
Remove parts from packages, Check
that all parts were included,
1 hose clamp
2 inlet hoses
4 flat water hose washers
2 front-leveling legs with nuts
1 drain hose
Electrical requirements
Electrical Shock Hazard
Plug into a grounded 3-prong outlet.
Do not remove ground prong.
Do not use an adapter.
DO not use an extension cord.
Failure to follow these instructions
can result in death, fire, or electrical
shock.
If codes pemnitand a separate ground wire
isused, it is recommended that a quailied
eleclncian determine that the ground path
isadequate.
Do Nat greund to a gas pipe.
Check with a qualified elecldcian if you are
not sure the washer isproperly grounded.
Do Not have a fuse in the neukal or ground
circuit.
A 120-volt, 60-Hz, AC-only, 15-or
20-ampere fused electrical supply is
required, (Time-delay fuse or circuit breaker
is recommended,) It is recommended that
a separate circuit serving only this
appliance be provided,
Grounding instructions
his appliance must be grounded, In the
event of a malfunction or breakdown,
grounding will reduce the riskof electric
shock by providing a path of least
resistance for the electric current, Ynis
appliance is equipped with a cord having
an eduipment-greunding conductor and
a grounding plug, 1he plug must be
plugged into an appropriate outlet that is
properly installed and grounded in
accordance with all local codes and
ordinances,
WARNING - Improper connection at the
equipment-greunding conductor con
resultin o dsk of elecldc shock. Check with
o quoifieq electrician or serviceman if you
ore in doubt as to whether the appliance is
properly grounded. Do not modify the plug
provided with the appiance - if it will not fit
the ouifet, have a proper outlet installed by
a quaifieq electrician.
3-pron ground-
3-pronp type ougtlet
grouna
plug
ground
power
supply cord
PAGE 3