Pump Specifications/Technical Data; Contents, Unpacking - 3M 43 Serie Manual Del Usuario

To reduce the risks associated with lifting and handling:
• Always follow proper lifting and handling practices when moving system components.
To reduce the risks associated with tripping, falling and tipping:
• Route all hoses and extension cords away from traffic areas, sharp edges, moving parts and hot surfaces. Do not
pull on any of the air hoses to move the diaphragm fluid pump assembly.
To reduce the risks associated with environmental contamination:
• Spray materials, solvents and other cleaning materials must be disposed of per federal, state and local regulations.
To reduce risk associated with hazardous air pressure:
• Maintain spray equipment per 3M care and cleaning instructions in the applicable owner's manual.
• Ensure air input pressure and all applicator system regulators are properly adjusted prior to each use.
• Always follow required air pressure relief procedures for relieving air pressure from the unit.

Pump Specifications/Technical Data

Maximum Fluid Working Pressure
Air Pressure Operating Range
Maximum Air Consumption
Maximum Free Flow Delivery
Maximum Pump Speed
Maximum Suction Lift
Maximum Size Pumpable Solids
Air Inlet Size
Fluid Inlet Size
Fluid Outlet Size
Pressure Ratio
Net Weight
Wetted Parts
Balls
Seats
Diaphragms
Passages
Pump Body
Contents
Unpacking
Remove all the components from the box. Inspect for
concealed damage or missing items. If you discover
CAUTION
75psi
15psi min./75psi max.
4 scfm
4.5gpm/16 lpm
300 cycles per min./Water
20ft./Wet
1/32"/1.0 mm
1/4"
3/8"
3/8"
1:1
8.8 lbs
Stainless Steel
Stainless Steel
PTFE
Nickel plated aluminum alloy ADC-12
Die Cast aluminum alloy ADC-12
any damage or missing pieces, contact your distributor
immediately.
4