Avanti BD6000 Manual De Instrucciones página 20

Dispensador / enfriador de cerveza
Tabla de contenido

Publicidad

3)
?
Rubber hose will absorb and retain odors.
4)
?
Unfiltered air, Air is moisture ridden or
oily.
May taste and smell extremely yeasty, or moldy.
Cause
1)
?
Contaminated Air Line.
2)
?
Improper transportation of barrels of beer,
Beer delivered on open truck, during high
summer temperatures, may be the cause
for starting secondary fermentation.
3)
?
No refrigeration, and improper rotation.
Beer, when drawn, is all foam, or too much foam, and not enough liquid beer.
Cause
1)
?
Improper drawing beer into glass.
?
Dirty air lines should be washed with a good
cleaning compound, normally used for cleaning
coils, and then rinsed clean.
3)
?
Rubber hose will absorb and retain odors. An
approved Vinyl tubing is best for air since it does
not absorb moisture, and is not affected by oily
substances.
?
A fresh, outdoor, air line is imperative when air is
the source of pressure.
4)
?
Air must always be filtered.
?
See Flat Beer, Correction #8 for moisture ridden
air.
SOUR BEER
Corrections
1)
?
See Cloudy Beer, Correction #3
?
See Off-Taste Beer, Correction #2
?
See Flat Beer, Correction #7
2)
?
If at all possible, deliver beer barrels in closed
body, refrigerated truck. If open staked body
truck is used, cover barrels with a tarpaulin for
protection against summer heat, and circulating
warm air.
?
Truck should never be loaded the night before
morning delivery, unless beer is refrigerated in
truck.
3)
?
The rule is first barrel in, first tapped.
?
Refrigeration must be left on winter or summer.
?
Sour beer is generated as a result of secondary
fermentation, above 45 degrees. Retail outlets
that do not have refrigeration should ice up
barrels, or at least cover barrels with tarpaulin or
burlap bags.
?
Best temperature for barrels is 38° to 40°.
WILD BEER
Corrections
1)
?
Open faucet quickly and completely.
?
Check and find the correct distance to hold glass
from faucet when drawing. Proper foam should
be a tight, creamy head, and the collar on the
average glass should be ¾ " to 1" high.
20

Publicidad

Tabla de contenido
loading

Tabla de contenido