Technical Data - Husqvarna R 322TX AWD Manual Del Usuario

Technical data

Dimensions
Length without cutting deck, mm/ft
Width without cutting deck, mm/ft
Height, mm/ft
Weight without cutting deck, with empty tanks, kg/lb
Wheel base, mm/ft
Track width, front, mm/ft
Track width, rear, mm/ft
Tire dimensions
Tire pressure, rear – front, kPa / bar / PSI
Max. gradient, degrees °
Engine
Brand / Model
Nominal engine output, kW
3
Displacement, cm /cu.in.
Max. engine speed, rpm
Fuel, min. octane grade, AKI
Tank volume, liters/USqt
Oil
Oil volume incl. filter, liters/USqt
Oil volume excl. filter, liters/USqt
Start motor
Transmission
Brand / Model
Oil, class SF-CC
Electrical system
Type
2
The power rating of the engine indicated is the average net output (at specified rpm) of a typical production
engine for the engine model measured to SAE standard J1349/ISO1585. Mass production engines may differ
from this value. Actual power output for the engine installed on the final product will depend on the operating
speed, environmental conditions and other values.
849 - 004 - 21.10.2019
Technical data
2
R 322TX AWD
2013/6.60
883/2.90
1165/3.82
253/557.8
887/2.91
712/2.34
627/2.06
16×6.50×8
60 / 0.6 / 8.5
10
Briggs & Stratton / 7220 Endurance
Twin EFM
12.6
656/40
3000 +/- 100
87
12/13
Class SF, SG, SH or SJ SAE40,
SAE30, SAE10W-30, SAE10W-40 or
SAE5W-20
1.7/1.8
1.5/1.6
Electric start 12V
Tuff Torq / K574A
SAE 10W/50 Synthetic
12V, negative earthed
35