Important Safety Information
Electric shock and fire hazard:
• Do not expose this unit to rain or moisture.
• Do not use the unit if it is wet or damaged.
• Use test leads or accessories that are appropriate for the application.
Refer to the category and voltage rating of the test lead or
accessory.
• Inspect the test leads or accessory before use. They must be clean
and dry, and the insulation must be in good condition.
• Use this unit for the manufacturer's intended purpose only, as
described in this manual. Any other use can impair the protection
provided by the unit.
Failure to observe these warnings could result in severe injury or death.
Electric shock hazard:
• Do not apply more than the rated voltage between any two input
terminals, or between any input terminal and earth ground.
• Do not contact the test lead tips or any uninsulated portion of the
accessory.
Failure to observe these warnings could result in severe injury or death.
4
Electric shock hazard:
Contact with live circuits could result in severe
injury or death.