4. OPERATION
4.1.
Operation principle and description:
This machine dries textile fibres by blowing hot air through them. This air flow drives the moisture
outside the building.
Steps for a correct drying process:
•
Work with one single type of fibre. Do not mix different types of fibres in the same drying
cycle.
•
Load the dryer.
•
Turn on the machine.
•
For the analogical machine:
o Select the length of the drying programme using the timer.
o Select the correct temperature using the thermostat.
•
For the machine with microprocessor:
o Select the drying program by means of the microprocessor, which includes all the
parameters required to optimize the drying process.
•
Press the start button.
•
Unload machine at the end of the programme
!!! WARNING: REMOVING LOAD WITHOUT SETTING TO COOLDOWN (PROGRESSIVE
Note: In case of self-service (coin- or token-operated) see point 4.3.8
DTA-DTP-11-18-27_Manual_ML
COOLING) MAY CAUSE BURNS !!!
Página 49 de 109