Requirements For The Set-Up Location; Operating Components - Silvercrest SPS 3 A1 Instrucciones De Uso

Requirements for the set-up location

For safe and trouble-free operation of the device, the set-up
location must fulfil the following requirements:
■ Place the device on a firm, flat and level surface.
■ Set up the device so that the speakers
■ Do not operate the device in a hot or very wet environment
or in the vicinity of combustible materials.

Operating components

(See fold-out page for illustrations)
1
LED lights
2
Speakers
3
Headphone socket
4
ON/OFF | VOL knob (On/Off and volume control)
5
Microphone socket
6
Operating LED
7
LED ON / OFF switch
8
Power supply cable with USB type A connector
9
Audio cable with 3.5 mm headphone jack plug (green)
and 3.5 mm microphone jack plug (red)
0
Cable adapter
(3.5 mm Ø jack socket to stereo RCA plugs)
q
Operating instructions (symbol)
SPS 3 A1
(3.5 mm Ø jack socket)
(3.5 mm Ø jack socket)
2
are not covered.
GB │ MT │
47 ■