Connecting The Microphone - Silvercrest SPS 3 A1 Instrucciones De Uso

NOTE
► When you connect your headphones, the speakers
muted and the audio signals are only routed through the
headphone socket
► The headphone socket
adjust the volume using the ON/OFF | VOL knob
the maximum volume is set by the computer or playback
device. Please note that headphones may only be connect-
ed if the output from the playback device complies with the
required normative limits. For more information, refer to the
instruction manual of the playback device.
D

Connecting the microphone

NOTE
► Depending on the computer hardware/software you are
using, you may need to set up the microphone socket in
your computer's system settings before using it. Please refer
to the manual for your computer hardware/software for
more information.
Make sure that the ON/OFF | VOL knob
♦
position.
♦ Plug the 3.5 mm jack plug of the microphone into the micro-
phone socket
♦ Before turning on the microphone, turn on the soundbar
again.
♦ Turn on the microphone and carefully increase the volume.
SPS 3 A1
3
.
3
is passive, i.e. it is possible to
5
.
2
4
4
is in the OFF
GB │ MT │
are
, but
51 ■