Specifications - Sony BKM-227W Manual De Instrucciones

Specifications

General
Voltage +3.3 V, +5 V (supplied from the
main unit)
Power consumption
Approx. 1.8 W
Operating conditions
Temperature
0 °C to 35 °C (32 °F to 95 °F)
Optimum temperature
20 °C to 30 °C (68 °F to 86 °F)
Humidity 0 % to 90 % (no condensation)
Pressure 700hPa to 1060hPa
Storage and transport conditions
Temperature
–20 °C to +60 °C (–4 °F to
+140 °F)
Humidity 0% to 90%
Pressure 700hPa to 1060hPa
Maximum external dimensions (w/h/d)
100 × 20 × 162 mm
13
(4 × /
Mass Approx. 240 g (8.5 oz)
Input connectors
Video input connectors
Composite input
BNC type (1)
1 Vp-p ± 3 dB sync negative
Y/C input
4-pin mini DIN (1)
Y: 1 Vp-p ± 3 dB sync negative
C: 0.286 Vp-p ± 3 dB (NTSC burst
signal level)
0.3 Vp-p ± 3 dB (PAL, PAL-M
burst signal level)
For information about available signal formats,
see the operating instructions for the main unit to
which the adaptor is installed.
1
× 6 / inches)
16 2
Output connector
Video output connector
BNC type (1)
Loop-through, with 75 ohms
automatic terminal function
4-pin mini DIN (1)
Loop-through, with 75 ohms
automatic terminal function
Signal characteristics
Video signal
Sampling frequency
Y/R-Y/B-Y: 13.5 MHz
Quantization
10bits/sample
Supplied accessories
Operating Instructions (1)
Design and specifications are subject to
change without notice.
Note
Always verify that the unit is operating
properly before use. SONY WILL NOT BE
LIABLE FOR DAMAGES OF ANY KIND
INCLUDING, BUT NOT LIMITED TO,
COMPENSATION OR REIMBURSEMENT
ON ACCOUNT OF THE LOSS OF PRESENT
OR PROSPECTIVE PROFITS DUE TO
FAILURE OF THIS UNIT, EITHER DURING
THE WARRANTY PERIOD OR AFTER
EXPIRATION OF THE WARRANTY, OR
FOR ANY OTHER REASON
WHATSOEVER.
BKM-227W NTSC/PAL Input Adaptor
5
GB