Outdoor Unit Installation - Danby DAS180DBAHWDB Guia De Instalacion

INSTALLATION INSTRUCTIONS

OUTDOOR UNIT INSTALLATION

Step 1: Select installation location
Before installing the outdoor unit, choose an appropriate location for the unit. Proper installation locations
meet the following requirements:
• Good air circulation and ventilation.
• Firm and solid; the location can support the unit and will not vibrate.
• Noise from the unit will not be disturbing.
• The unit will be protected from prolonged periods of direct sunlight, rain or snow.
• The location must meet the special requirements outlined below:
Do not install the unit in the following locations:
• Near obstacles that will block air inlets or outlets.
• Near a public street, crowded areas or where noise from the unit will disturb others.
• Near animals or plants that could be harmed by hot air discharge.
• Near any source of combustible gas.
• In a location that is exposed to large amounts of dust.
• In a location that is exposed to large amounts of salty air.
Special Considerations For Extreme Weather
If the unit is exposed to heavy wind, install the unit so that the air outlet fan is at a 90° angle to the direction
of the wind. If needed, build a barrier in front of the unit to protect it from the wind.
If the unit is exposed to heavy rain or snow, build a shelter above the unit to protect it. Be careful not to
obstruct air fl ow around the unit.
If the unit is exposed to salty air, use an outdoor unit that is specially designed to resist corrosion.
17