Blaupunkt Phoenix MP33 Instrucciones De Manejo página 7

Turn on/off message edit
You can edit the turn on/off message and store it in memory.
Following four messages can be edit with 8 characters each.
Turn-on message
• HELLO (MESG 1) / WELCOME (MESG 2)
Turn-off message
• SEE YOU (MESG 3) / GOOD-BYE (MESG 4)
1.
Repeatedly press the to display the "MESG ON" on
DISP
the display window.
2.
Press the to flash the "HELLO".
SC/PS
3.
Rotate the VOL dial to select the desired message you
want to edit.
HELLO ➜ WELCOME ➜ SEE YOU ➜ GOOD- BYE
4.
Press the , then enter the character.
SC/PS
A. Rotate the VOL dial in a clockwise direction to select
the desired characters.
< >
( A ➜ B ➜ C ➜ . . . Z ➜ ➜ ➜
➜0➜1➜2➜3...9➜" "Space )
B. Rotate the TUN/TRK dial to move the flashing cur-
sor.
C. Repeat steps A. and B. to complete entering the en-
tire message 8 characters max.
Tips
• To erase /correct a message, press the
2 seconds to clear the character and re-enter.
• If you make no button input or dial operation in 30 sec-
onds, the message edit mode will turn off automatically.
• Make sure the "MESG" will be "ON" .
• When entering a name, pressing the following buttons af-
fects the display of characters as follows.
: Changes to inputting letters. (Starts with " A ".)
1
: Changes to inputting numbers. (Starts with "
2
: Changes to inputting characters. (Starts with "
3
: Enters a space (blank).
6
5.
Press the to store the message.
SC/PS
The new message flashes.
6.
To return to the previous indication, Press
E-6
Erasing the turn on/off message
You can erase the turn on/off message if so desired.
1.
Repeatedly press the
on the display window.
2.
Press the
desired message you want to erase.
3.
Press the
seconds.
4.
To return to the previous indication, Press
Repeat steps 2. and 3. if you want to erase other mes-
sage.
∗ + − . /
➜ ➜ ➜ ➜ ➜
'
for more than
DISP
0
".)
<
".)
.
DISP
to display the "MESG ON"
DISP
SC/PS , then rotate the VOL dial to select the
, then press the for more than 2
SC/PS
DISP
.
DISP