ENGLISH
1
SAFETY INSTRUCTIONS
1.1
Pictograms in this manual
Caution
Indicates risk of damage to the
appliance.
Warning
Indicates a dangerous situation that
may lead to death or serious injuries.
Warning
Always switch off power when
performing maintenance or repairs on
the convector heater!
Hot
Some surfaces may be hot! Wait until
these parts have sufficiently cooled
down before performing
maintenance.
Suggestions and tips to facilitate the
specified tasks or actions.
1.2
Pictograms on the heater (fig. 2)
A
User instructions
B
Fuel consumption data
1.3
Use this product for its intended
use
The heaters described in this manual are
suitable for heating using propane gas.
The heaters have been designed for:
•
Drying newly built buildings.
•
Specific heating of workshops in a fire-
safe environment.
•
Heating of sufficiently ventilated rooms.
•
Defrosting pipes, installations, appliances
and goods in situations in which there is
no danger of fire.
•
Frost protection in industry, construction
and tunnels in horticulture.
GA 42-60-85-110
GA 24-42-60-85-110
1.4
General instructions
Warning
•
•
•
•
•
•
•
•
•
•
•
•
40.020.947 - rev. 04 - 2011
40.020.947 - rev 05 - 2016
English
Read this manual carefully
before using the heater.
Keep this document with the
heater.
Follow the described procedures.
Never lean against the heater.
Keep highly inflammable
materials at a minimum distance
of 3 m from the heater:
Do not put the heater on an
inflammable floor.
Make sure there is enough air for
good combustion.
Only perform repair and
maintenance activities when the
heater has sufficiently cooled
down and after removing the plug
from the socket.
Make sure there is fire-
extinguishing equipment near the
heater.
The gas connection must comply
with the applicable local
regulations.
Use gas bottles exclusively in a
standing position.
Do not place the gas bottles in
the hot air flow.
17
17