Installing The Camera On A Flat Surface - Sony IPELA SNC-RZ25N Manual De Instalación

Removing the camera
1
Remove the three screws used to
attach the camera in step 5 of
"Installation."
2
While pushing the entire camera up
towards the ceiling, move the camera
to the front.
The hooks will disengage, and you can
remove the camera.
Installing the Camera on a
Flat Surface
Be sure to place the camera on a flat surface.
If you must place the camera on an inclined
surface, place it within ±15 degrees of the
horizontal in order to ensure the pan/tilt
mechanism functions properly, and take
countermeasure for preventing the camera
from falling.
Notes
• Do not grasp the camera head when
carrying the camera.
• Do not turn the camera head manually.
Doing so will result in the camera
malfunctioning.
Installing the Camera
15
GB