Installing The Camera - Sony Exwave HAD SNC-CS3N Manual De Instalación

Installing the
Camera

Installing the camera

When you install a tripod or housing on the
camera, use the tripod adapter attached to
the camera to secure the camera firmly.
Although the tripod adapter has been
attached to the top of the camera at the
factory, you can attach it to the bottom of the
camera according to your camera location.
Tripod adapter
To install the drop-prevention wire
rope
When you install the camera at a higher
location such as a ceiling, be sure to install
the supplied drop-prevention wire rope to
the camera.
1
Secure the wire rope to the junction
box on the ceiling.
Use a screw to match the screw hole of
your junction box (not supplied).
2
Secure the wire rope to the wire rope
mounting screw hole on the rear of the
camera using the supplied shoulder
screw.
MANUAL
5 4 3 2 1
Installing the Camera
Wire rope
(supplied)
15
GB