HD Radio™ Tuner
(for
Display received emergency alert messages
The received emergency alert messages are stored in the Alert Message List,
and you can check them later.
While listening to the HD RADIO source...
1
Press
to display the Alert Message List.
2
Turn the volume knob to select a message.
3
Press the volume knob to display the information related to the
message.
4
Press
again to exit.
• "NO LIST" appears when the list is empty.
• This feature can store up to four messages in the list.
• To clear the message list, set [FACTORY RESET] to [YES]. (Page 7)
Other settings
1
Press the volume knob to enter [FUNCTION].
2
Turn the volume knob to select an item (see the following table), then
press the knob.
3
Repeat step 2 until the desired item is selected/activated or follow the
instructions stated on the selected item.
4
Press and hold
to exit.
To return to the previous setting item, press
/
)
.
[TUNER SETTING]
[SEEK MODE]
Selects the searching method for S / T buttons when pressed.
[AUTO1]: Automatically search for a station or channel. ; [AUTO2]: Search
for a preset station or channel. ; [MANUAL]: Manually search for a station
or channel.
[IF BAND]
[AUTO]: Increases the tuner selectivity to reduce interference noises from
adjacent FM stations. (Stereo effect may be lost.) ; [WIDE]: Subjects to
interference noises from adjacent FM stations, but sound quality will not be
degraded and the stereo effect will remain.
[AUTO MEMORY]
[YES]: Automatically starts memorizing 6 stations with good reception. ;
[NO]: Cancels.
• Selectable only if [NORMAL] is selected for [PRESET TYPE]. (Page 6)
[RECEIVE MODE]
Sets the receive mode of the HD Radio receiver.
[AUTO]: Automatically tunes to analog broadcast when there is no
digital broadcast. ; [DIGITAL]: Tunes in to digital broadcast only. ;
[ANALOG]: Tunes in to analog broadcast only.
[CLOCK]
[TIME SYNC]
[ON]: Synchronizes the unit's time to the Radio Broadcast Data System
station time. ; [OFF]: Cancels.
Default: [XX]
9
ENGLISH