Yamaha BD-S1065 Manual De Instrucciones página 35

HDMI Video Out
This sets the resolution of the HDMI video output.
Some TV are not fully compatible with the Blu-ray disc
player, which may cause the image distortion. In this case,
press VIDEO-RESET on the remote control for five
seconds. "HDMI Video Out" will be reset to "Auto"
(factory preset value).
Auto*, 1080p, 1080i, 720p, 480p/576p
Note
– When the BD player is connected to a 1080p/24Hz
compatible TV and the "HDMI Video Out" is set to
"Auto", 1080p/24Hz will automatically be displayed
when compatible discs are played back.
At 1080p/24Hz, 1080p/50Hz, or 1080p/60Hz, there
is no output from the COMPONENT jacks and
VIDEO jack.
Video Out Select
Dual video output is possible simultaneously from the
analog video jacks (component, S-video, and video) and
the HDMI terminal with the following settings. Select the
video output which you want to have priority according to
the following chart.
HDMI* : Select this to give priority to HDMI output. You can
set the resolution of the HDMI video output in
"Settings" - "Audio Video Settings" - "HDMI Video
Out". (See page 31.)
Component:
Select this to give priority to analog (component, S-
video, and video) output. You can set the resolution
of the component video output in "Settings" -
"Audio Video Settings" - "Component Video Out".
(See page 30.)
Notes
– 1080p is only available in HDMI.
Settings on this Player
Video Out HDMI Video
Select Out
HDMI Auto
1080p
1080i
720p
480p/576p
Settings on this Player
Video Out Component
Select Video Out
Component 1080i *1
720p *1
480p/576p
480i/576i
*1
Some discs prohibit high definition video output from
COMPONENT jacks. In this case, video resolution is converted to
480p/576p (when "Video Out Select" is set to "Component") or
480i/576i (when "Video Out Select" is set to "HDMI").
*2
Depends on the TV connected. No video output when 1080p
signal is output from the HDMI terminal.
Output Resolution
Component
S/CVBS Out
Out
*1 *2 *3
480i/576i
No Output No Output
1080i *1 480i/576i
720p *1 480i/576i
480p/576p *1 480i/576i
Output Resolution
HDMI Out S/CVBS Out
*1
1080i 480i/576i
*1
720p 480i/576i
480p/576p 480i/576i
480i/576i 480i/576i
*3
No video output when 1080p signal is output from the HDMI
terminal.
– If the video equipment connected to each of the
terminals is not compatible with the resolution of the
priority video output, abnormalities in images on the
screen may appear.
Hint
– This function can also be performed by the front
panel buttons. Press and hold
front panel (or press and hold DIMMER on the
remote control) for more than 4 seconds while no
disc is inserted in this Player and the disc tray is
closed.
Secondary Audio
You can turn on and off the audio of the picture in picture
or audio commentaries.
– Select "On" to output the audio of the picture in
picture.
– Select "Off" to enjoy the high-quality sounds of BD-
Video.
Hint
– When you set "Secondary Audio" to "Off", this unit
does not output the clicking sound on the menu.
On, Off*
Audio Out
You can set the audio output suited for your playback
environment.
1 Select the audio output connected to a TV or AV
receiver.
HDMI Output*: Select this when you connect using HDMI
terminal.
Digital Output:
Select this when you connect using DIGITAL
OUT terminal (COAXIAL/OPTICAL).
7.1ch Audio Select this when you connect using AUDIO OUT
Output:
(8ch discrete) jacks.
2ch Audio
Select this when you do not use SURROUND
Output: sound equipment.
2 Select the output mode.
When you selected "HDMI Output"
Bitstream*:
– Select this when connecting to HDMI
equipment with a built-in decoder for DOLBY
DIGITAL, etc.
– Setting to Bitstream will output each audio
signal by Bitstream.
PCM (Surround): – Select this when connecting to multi-channel
HDMI equipment (without a built-in decoder
for DOLBY DIGITAL, etc.) or 2ch HDMI
equipment such as TV.
– Setting to PCM (Surround) will output by
LINEAR PCM by decoding audio signals
recorded in each audio output mode such as
DOLBY DIGITAL, DTS.
Settings
and on the
4
31
En