Hand Guard; Blade And Blade Guard - Husqvarna 136 LiHD50 Manual De Instrucciones

Turn on the machine. Press the power trigger lockout on
the front handle.
• Press the power trigger forward to release the power
trigger.
1
• Then press the power trigger up to apply full power.
2
Release the power trigger and check thereby the free
back movement of the power trigger. The cutting unit must
stop within 1 second.
Restart the machine and release the power trigger
lockout on the front handle. Check that the power trigger
lockout returns to its original position when you release it.
The cutting unit must stop within 1 second.
12 – English
GENERAL SAFETY PRECAUTIONS

Hand guard

Li-ion Li-ion
The hand guard prevents hands from coming into contact
with the moving blades, for example, if the operator loses
grip on the front handle.
Check that the hand guard is fitted correctly. Check that
the hand guard is undamaged.

Blade and blade guard

Li-ion Li-ion
The outer part of the blades (1) is shaped as blade
guards.
Check that the blade guard is not damaged or distorted.
Replace the cutting unit if it is bent or damaged.