Ambiano IK 4017 Manual Del Usuario página 24

Operation
Selecting power levels
By pressing the selector button
is shown on the LED display
on�
Using selector button
desired power level or change it� The selected power level is shown on the LED
display �
7
Temperature levels for the cooktop
If you prefer working with temperature levels instead of power levels, you can
switch to the temperature mode by pressing the selector button
Level (1-5) Temperature [°F]
1
2
3
4
5
The predefined temperature (392°F) is displayed� With selector button
selector button 8
it� The selected temperature level is shown on the LED display
levels are selectable in 36°F intervals between 140-465°F; deviations are possible)�
After the heating-up process the temperature of the cookware is
(automatically) kept approximately stable (depending on the defined
temperature level)�
The device must be switched off after every use and disconnected from the power
supply (as soon as the internal fan in the device has cooled down and stopped
running) by pulling the mains plug from the power outlet� Let the device cool down
to room temperature before cleaning and/or storing it�
24
once, the predefined power level "8" (1600 W)
9
7 and the device or cooktop
6 or selector button
2
140
176
212
248
284
, you can now define the desired temperature level or change
2 has been switched
8 , you can now define the
Level (6-10) Temperature [°F]
6
7
8
9
10
Note: The specifications may deviate�
7
9 again�
320
356
392
428
464
or
6
� (Temperature