Taurus Optima Manual De Instrucciones página 24

- Mill lid
Self-cleaning function:
- Put water and a small amount of washing up
liquid in the jar.
- Select the function "Turbo".
Removable Blades for Effective Cleaning
(Jar Blender Only)
-Loosen the blade fixing ring by turning it in
clockwise direction.
-Remove the blade fixing ring, blade set,
sealing ring and clean them. (Fig.5)
-After cleaning, replace the blade set and turn
blade fixing ring in opposite direction.
(**)Removable Mill's Sealing Ring for
Cleaning
-Remove the mill's sealing ring inside the lid.
(Fig.6)
-Clean it and replace the ring in original
position.
Anomalies and repair
- Take the appliance to an authorised
technical support service if product is
damaged or other problems arise. Do not
attempt to disassemble or repair the appliance
yourself as this may be dangerous.
- If the connection to the mains has been
damaged, it must be replaced and you should
proceed as you would in the case of damage.
For EU product versions and/or in case
that it is requested in your country:
Ecology and recyclability of the product
- The materials of which the packaging of
this appliance consists are included in a
collection, classification and recycling system.
Should you wish to dispose of them, use the
appropriate public containers for each type
of material.
- The product does not contain concentrations
of substances that could be considered
harmful to the environment
- This symbol means that;
should you wish to dispose
of the product once its
working life has ended, take
it to an authorised waste
agent for the selective
collection of Waste from
Electric and Electronic Equipment (WEEE).
This appliance complies with Directive
2006/95/EC on Low Voltage and Directive
2004/108/EC on Electromagnetic
Compatibility.