Yamaha SW10 Manual De Instrucciones página 5

Ocultar thumbs Ver también para SW10:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Specifications
General specifications
Type........................................... Bass Reflex Powered Speaker
Frequency Range ....................... 25–150 Hz (–10 dB)
Sensitivity .................................. –12 dB at Vol. Max (for 100 dB/SPL, 1 m on Axis)
Maximum Output Level ............. 111 dB (1 m on Axis)
Dimensiones (W × H × D).......... 328 × 459 × 476 mm
Weight ....................................... 26 kg
Speaker unit
Speaker Unit .............................. 25 cm Cone (8 Ω , magnetic shielded)
Enclosure ................................... Type: Bass Reflex
Amp.unit
Maximum Output Power............ 180 W at 100 Hz, THD= 1%, RL= 8 Ω
Input Sensitivity/Impedance ....... –6 dB to +4 dB/10 k Ω (Input 1, 2, 3)
Hum & Noise............................. ≤ –60 dBu (Volume= Min) DIN Audio filter
Signal to Noise Ratio.................. ≥ 100 dB (IEC-A Weighting)
Controls ..................................... VOL (Level Control)
Connectors ............................... Input 1, 2, 3 (XLR-3-31), Output 1, 2, 3 (XLR-3-32)
Power Indicator/Clip Indicator ... Green/Red LED
Power Requirement.................... USA and Canada: AC 120 V, 60 Hz
Power Consumption................... 160 W
Specifications and appearance are subject to change without notice.
For European Model
Purchaser/User Information specified in EN55103-1 and EN55103-2.
Inrush Current: 11A
Conformed Environment: E1, E2, E3 and E4
Dimensions
W: 328
6
CUTOFF FREQ. Control: 40–120 Hz (Variable)
PHASE Switch: REV/NORM
POWER Switch: ON/OFF
Europe:
AC 230 V, 50 Hz
Others:
AC 240 V, 50 Hz
407
D: 476
Unit: mm
69

Publicidad

Tabla de contenido
loading

Tabla de contenido