Inepro MicroTimer 2400 Manual De Uso página 11

2. Operating Manual MicroTimer
Read the manual carefully before switching on the device!
Always check the 240 V 50Hz or 24 V AC/DC power supply before connecting the device.
Your supplier does not take any responsibility if the safety norms are not followed.
Always disconnect the power supply before handling any part of this device.
The device has to be connected by authorised and prepared personnel only.
Contents:
Introduction
Design
Versions
Possibilities
Standard functioning
Extra functioning
Settings
The programmer's stand
Function overview
Specifications
Wiring diagram
This document:
This document describes the technical and functional operation of the 240V mains voltage and 24V low voltage
®
MicroTimer versions.
Greatest care has been taken drafting the information in this manual and it may be said that it is reliable.
However, the producer is not liable for any shortcomings in the text or incompleteness of the information.
Thank you for your decision to use the MicroTimer
®
ATTENTION
®
.
®
MicroTimer 2400 Version 4.0 05-11-2007
- www.inepro.com
2400
-
. . . 12
. . . 12
. . . 12
. . . 13
. . . 13
. . . 13
. . . 14
. . . 14
. . . 14
. . . 18
. . . 51
11