Recording From A Cd Or Md By The Track; Track Recording - Sony MDX-C800REC Manual De Instrucciones

Recording from a CD or
MD by the track

— Track recording

1
Press (OPEN) and insert the MD to be
recorded on.
(See "Playing a disc" on page 10.)
2
Play the CD or MD from which you want
to record.
3
Press (MD REC).
Information of the playing CD
The unit stands by for recording with "z"
flashing and the buttons for recording
((MD REC), (REC STOP), and (REC MENU))
lit in amber.
4
Press (REC MENU) repeatedly until
"Track. REC" appears.
Each time you press (REC MENU),
recording mode changes as follows:
B Track. REC
Normal REC b
* If you did not create a program, this item will
not appear.
Information of the playing CD
If you want the actual recording to start
from the point on the track where you press
(MD REC) next, select "Normal REC" in
this step.
5
Press either side of (SEEK/AMS)
repeatedly to select the track you want
to record.
18
Remaining recordable time
B Disc. REC
PGM. REC* b
6
Press (MD REC) again to start recording.
MD's track No.
The unit locates the beginning of the
selected track and starts recording.
Then "z" stops flashing and the buttons for
recording ((MD REC), (REC STOP), and
(REC MENU)) light in red.
When the recording of the track is
completed, the unit beeps and
automatically stands by for further
recording while the CD or MD continues to
play.
To cancel the recording or recording stand-by,
press (REC STOP).
Inserting the MD to record upon
afterwards
You can still start recording even if a CD or
MD in the connected CD/MD unit is already
playing and an MD is yet to be inserted into
this MD recorder.
1
Press (MD REC).
2
Insert an MD while "REC NO Disc" is
displayed (within 10 seconds after
step 1).
3
Press (REC MENU) repeatedly until
"Track. REC" appears.
4
Press (MD REC) again to start recording.
Note
Be sure to insert an MD while "REC NO Disc" is
displayed. If the indication disappears, recording
stand-by is canceled.
MD's elapsed
recording time