Changing Over The Door Hinges; Installation; Aligning The Appliance - Bosch GSN24V22 Instrucciones De Montaje

Tabla de contenido

Publicidad

de
en
Changing over the door
hinges
(If required)
Figure 5
Before changing over the door hinges,
reposition the door handle.
Installation in numerical sequence.

Installation

Figure 6
Install the appliance in a dry, well
ventilated room. The installation location
should neither be exposed to direct
sunlight nor near a heat source, e.g.
a cooker, radiator, etc. If installation next
to a heat source is unavoidable, use
a suitable insulating plate or observe
the following minimum distances to a heat
source:
3 cm to an electric cooker.
from an oil or solid fuel cooker 30 cm.
Appliances with fitted handles must be
situated at least 55 mm from the wall
on the hinge side so that the door can
be opened by 90°.
8

Aligning the appliance

Figure 7
Place the appliance in the designated
location and align.
Adjust the height adjustable feet with
a screwdriver.

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Gsn24v70ex

Tabla de contenido