Battery; Service - Husqvarna PP518 Manual De Instrucciones

Battery

Disconnect the battery.
1 Always disconnect the BLACK (-) earth cable from the
battery (13 mm or 1/2-inch wrench) first.
2 Then disconnect the RED (+) cable.
Charging the battery.
The only safe way to charge a battery is to completely remove
it from the hydraulic unit. A standard charger with a charging
power of 12 V and 2 to 10 A can be used. Follow all the
instructions relating to the charger before it is connected to
the battery.
To connect the battery again after charging, see the
instructions under Connecting the battery heading.

Service

WARNING! All types of repairs may only be
!
carried out by authorised repairmen. This is
so that the operators are not exposed to
great risks.
MAINTENANCE
– 17
English