Safety Notes; Installation Instructions; Symbol Description; Special Accessories - Hansgrohe AXOR Massaud 42310000 Instrucciones De Montaje

Safety Notes

Gloves should be worn during installation to prevent
crushing and cutting injuries.
The shower system may only be used for bathing,
hygienic and body cleansing purposes.

Installation Instructions

• Prior to installation, inspect the product for transport
damages. After it has been installed, no transport or
surface damage will be honoured.
• Only non-locking drain valves may be installed in the
wash bowls, e.g. Hansgrohe drain valve, part no.
50001000.
• Before starting any mounting work, check all
dimensions and installation positions.
• The distance between basin and wall must be 50 mm.
• The product is not equal to DIN EN 31 + 32.

Symbol description

Do not use silicone that contains acedic
acid.
Installation tool (see page 32)
i
Installation example (see page
32)
Optionally, fittings of identical design may
be combined with the wash basin. However,
Hansgrohe does not take any liability for
the spray behaviour of such fittings.
Dimensions (see page 31)
4
English
Assembly see page 33
Spare parts (see page 34)

Special accessories

Lacquer pen Alpine White L 090 B01 (Audi
/ VW) for touching up minor paint damage
Cleaning
• Cleaning recommendations, see enclosed
brochure.
• First apply polish and then wax (car care
products may be used for this).
• If regularly cared for, the product will
retain its beauty for a long time to come.
• The product should neither be exposed to
acids, drain cleaners, hair dyes, ink pads,
India ink pens, nor to chlorine.
• If for some reason, the product exhibits
any scratches or loses ist shine, the
instructions stated above with regard to
polishing and waxing must be followed.
• For a professional repair
• of major damage, please contact your
dealer, or contact Hansgrohe directly
under the address given in the enclosed
Cleaning Recommendation.