Express Defrost With Memory; Manual Operations; Time Cooking; Single Stage Cooking - Sharp R-CD1200M Manual De Operación

Express Defrost with
Memory
* Suppose you want to cook with memory 0, which was
programmed for 10 minutes Express Defrost sequence,
Single Digit Input/Auto Start ON.
Procedure
1 Place food in oven.
Enter memory number.
Midway through the defrosting cycle, the CHECK
indicator will light in the display and an audible
signal will be heard unless signal volume has been
set to Mute. You may open the door, turn food over
and shield any warm portions. Close the door.
MANUAL OPERATION

Time Cooking

Your oven can be programmed for up to 4 cooking
sequences and has 11 preset microwave power levels.
Maximum Cooking Time
Microwave 100% - 60%
Microwave 50% - 10%
(Please see Maximum Cooking Time on page EN-22)
Microwave Power Level
Press the SELECT APPROXIMATE
POWER PAD PERCENTAGE OF
once then press
SELECT POWER
9
8
7
6
5
4
3
2
1
0

Single Stage Cooking

* Suppose you want to cook for 2 minutes and 30
seconds at 50%.
Procedure
1 Place food in oven and
press the SELECT TIME
pad. Enter cooking time.
2 Press the SELECT POWER pad
and enter power level.
0
Maximum of 60 minutes
Maximum of 120 minutes
Display
POWER
100%
90%
80%
70%
60%
50%
40%
30%
20%
10%
0%
SELECT
TIME
2 3 0
5
SELECT
POWER
2 Press the START pad to continue
defrosting.
NOTES:
1. Even though CHECK lights up in the display, your oven
continues defrosting and does not stop to check.
2. Press the START pad at step 2 to continue defrosting
as once the door is closed, cooking data will be
canceled if subsequent keys are not pressed within
3 minutes.
3. See HELPFUL TIP for Express Defrost on page EN-11.
3 Press the START pad.
NOTES:
1. It is not necessary to press the SELECT POWER pad
for 100% in Single Stage Cooking.
2. If cooking time input is over the maximum allowed
time, error message EE9 will be displayed. Press the
STOP/CLEAR pad to clear the error message and
reduce cooking time or power level. For details, see
Maximum Cooking Time on page EN-22.

Multi Stage Cooking

* Suppose you want to cook for 1 minute at 70% power
for 1st stage and then continue to cook for 2 minutes
at 50% power for 2nd stage and to cook for 3 minutes
at 100% power for 3rd stage.
1 Place food in oven and press
the SELECT TIME pad.
Enter cooking time for 1st
stage.
2 Press the SELECT POWER pad.
Enter power level for 1st stage.
3 Press the SELECT TIME pad.
Enter cooking time for 2nd
stage.
EN-10
Procedure
START
Procedure
START
Procedure
SELECT
TIME
1 0 0
SELECT
POWER
SELECT
TIME
2 0 0
7