Phono Mode; Aux Mode - auna Belle Epoque 1910 Manual Del Usuario

PHONO MODE

1 Press the PHONO button to enter PHONO mode. [PHO] appears on the
display.
2 Open the lid of the turntable. Release the tonearm lock and remove the
protective cap from the needle. Place a record on the turntable.
Note: When playing back 17 cm diameter EPs, place the EP adapter over
the spindle. Set the speed selector to 33/45/78 RPM depending on the
type of plate.
3 Lift the tonearm by the lift. Move the tonearm to the beginning of the
disk or to the beginning of a specific title.
4 Slowly lower the tonearm onto the disc using the lift to start playback.
When the disc is played, the tonearm automatically lifts and returns to
its holder.
5 To stop playback manually, lift the tonearm from the disc and place it in
its holder like the one.
Note: Moving or shaking the platter without securing the tonearm may
damage the tonearm. Place the protective cap on the needle when not
using the turntable.

AUX MODE

This unit provides an auxiliary audio input jack for connecting external audio
device like MP3 pla- yers, CD players and allow playback of your external
source through the system speakers.
1. Use an audio cable (not included) with a RCA stereo plugs on one end
of the cable. Plug one end into the AUX-IN jack on the main unit and
plug the other end of the cable into the LINE OUT or HEADPHONE Jack
of your external audio device.
2. Turn ON the unit and your external audio device. Press TAPE/AUX to
select AUX function. [AUX] will be shown on the display.
3. Start to play the external device.
EN
19