Program The Remote To Control Your Source - Bose SoundTouch 130 Guia Del Propietario

Ocultar thumbs Ver también para SoundTouch 130:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Program the remote to control your source

If your source does not support CEC, you can program the universal remote to
control your source, such as a TV, DVD/Blu-ray Disc
game system or DVR, by entering the code for your source's brand. There may be
several codes for your source. You may need to perform this procedure multiple
times to locate the correct code.
Locate your source's code
1.
Power on your source.
2.
Locate the code for your source's brand in the Universal Remote Device
Codes book (provided).
Enter your source's code
1.
On the remote control, press and hold the appropriate source button until all
six source buttons glow, then release.
For example, to program your TV, press and hold
buttons glow, then release.
The appropriate source button continues to glow.
2.
On the number keypad, enter the code for your source's brand and press + on
the volume button.
Test your source's code
1.
Test your source for basic functions. Follow the instructions for your source:
• TV: press the channel buttons. Press
Press
and
• Cable/satellite box: press
Press
and
• DVD or Blu-ray Disc
Press
and
• Game system: press
2.
Based on your source's response to basic functions:
• Remote responds accurately: press
save your settings.
• Remote does not respond or does not respond accurately:
- If your source button glows: press + on the volume button to move to
the next code. Repeat steps 1-2 in "Test your source's code". You may
need to repeat this procedure 30 or more times. If all six buttons blink
three times, you have cycled through all codes for your source.
- If your source button is off: your remote exited programming mode.
Repeat steps 1-2 in "Enter your source's code" and steps 1-2 in "Test
your source's code".
Note: Your source may not be compatible with IR universal remote controls. Refer
to your source's owner's guide for more information.
to navigate.
to navigate.
player: press
to navigate.
and
to navigate through your menu.
Using the System
player, cable/satellite box,
. The settings menu appears.
. The programming guide appears.
. The settings menu appears.
to exit programming and
until all six source
English - 25

Publicidad

Tabla de contenido
loading

Tabla de contenido