Pre-Installation - GE PGP953 Instrucciones De Instalación

Installation Instructions
PRE-INSTALLATION CHECKLIST
[Z]
@
When preparing cooktop opening, make
sure the inside of the cabinet and the
cooktop do not interfere with each other.
(See section on preparing the opening.)
Remove packaging materials, grate boxes,
regulator with literature, and literature
package from the cooktop before beginning
installation.
i/
/i/
Foam
Pac_,_,_ ///_,_r_/,_ _ _ _ _
Cooktop J
Package
Grate boxes
E1
Remove Installation Instructions from
literature pack and read them carefully
before you begin.
Be sure to place all literature (Owner's Manual,
Installation Instructions, etc.)in a safe place
for future reference.
El
El
FF1
[]
Make sure you have all the tools and
materials you need before starting the
installation of the cooktop.
Your home must provide the adequate
electrical service needed to safely and
properly use your cooktop. (Refer to section
on electrical requirements.)
When installing your cooktop in your home,
make sure all local codes and ordinances
are followed exactly as stated.
Hake sure the wall coverings, countertop
and cabinets around the cooktop can
withstand heat (up to 200°F) generated by
the cooktop.