NSK Ti-Max X X450L Manual Del Usuario página 4

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

CAUTION
· Read this Operation Manual before use to fully understand the product functions.
· When operating the handpiece always consider the safety of the patient.
· Users are responsible for the operational control, maintenance and continual inspection of this product.
· Do not attempt to disassemble the handpiece or tamper with the mechanism except as recommend by NSK in this Operation Manual.
· Do not allow any impact on to the handpiece. Do not drop the handpiece.
· Operators and all others in the area must wear eye protection and a mask when operating this handpiece.
· Should the handpiece function abnormally, cease operation immediately and contact your Authorised NSK Dealer.
· Depressing the push button while the handpiece is rotating will result in OVERHEATING of the chuck mechanism. Special caution must be
exercised during use to keep cheek tissue AWAY from the push button. Contact with cheek tissue may cause the push button to be depressed
and cause a burn injury to the patient.
· Do not use high acid water or sterilizing solutions to wipe, immerse or clean the handpiece.
· The products are delivered in a non-sterile condition and must be autoclaved prior to use.
· Perform regular function and maintenance checks.
· If the product is not used for a long period check it is functioning correctly before using on a patient.
· To avoid clinical downtime it is recommended that a spare be kept on hand in case of a breakdown during surgery.
2

Publicidad

Tabla de contenido
loading

Tabla de contenido