Maintenance And Cleaning - Bionaire BWLF1613MW Manual De Instrucciones

4. Adjust the tilt of the fan head to the desired angle by pushing gently up or down on
the fan guard, while holding the fan by the motor assembly. The fan may be moved up
and down, but not left to right.
NOTE: THE FAN MUST BE FULLY ASSEMBLED ON THE WALL BEFORE
MAKING THIS ADJUSTMENT; OTHERWISE THE FAN HEAD WILL NOT HOLD
INTO POSITION.
CAUTION: THE FAN SHOULD BE SWITCHED OFF BEFORE MAKING THIS
ADJUSTMENT.
Follow these instructions to correctly and safely care for your fan.

MAINTENANCE AND CLEANING

• Always unplug the fan before cleaning or disassembling.
• Be sure to clean your fan with a soft cloth moistened with a mild soap solution.
• Do not allow water to drip on or enter into the fan housing.
• Do not use gasoline, thinner, or benzene as a cleaner.
• Lightly run a vacuum cleaner nozzle over the fan grill to remove any dust or dirt that
may have accumulated.
FAN BLADE CLEANING INSTRUCTIONS
This fan is equipped with a removable grill that allows the consumer to remove the grill
and its components without the need of any tools.
Make sure the fan is unplugged before disassembling and cleaning the fan blade.
Carefully remove the front grill. Wipe the blade with a soft cloth moistened with a mild
soap solution. DO NOT allow any liquid to drip into or enter the motor housing. Snap the
front grill onto the fan. Make sure all parts are secured prior to operating the fan.
When storing your fan please use the original box. It is important to keep it in a safe, dry
location.
• Store your fan in the original box or an appropriately sized box.
• Protect the fan head from dust.
• Store your fan in a dry location.
BWLF1613MW-LA_14ESM1.indd 5
CLEANING AND MAINTENANCE
FAN STORAGE
4
6/9/14 5:13 PM