Cleaning And Maintenance - Bionaire BBLF01 Manual De Instrucciones

INTRODUCTION
Congratulations on the purchase of your Bionaire™
bladeless fan. This fan features innovative bladeless
technology to deliver smooth air flow and a variable
speed dial for cooling comfort and control.
OPERATING
INSTRUCTIONS
1. Set fan on a dry, level surface.
2. Connect the power adapter to the power jack
located on the rear base of the fan.
3. Plug power adapter into the appropriate outlet.
4. To turn the fan on, turn the variable speed dial
clockwise until the dial clicks. The power light will
glow blue.
5. To adjust the speed, continue to turn the variable
speed dial in the clockwise direction to increase
the speed as desired. The speed level may be
lowered by turning the dial counterclockwise.
6. To turn the fan off, simply turn the dial
counterclockwise until it clicks and the power
light shuts off.
OSCILLATION FUNCTION
7. If you would like the fan to oscillate, push the
oscillation button located to the right of the speed
dial. To stop oscillation, push the button again.
SLEEP TIMER
8. Your bladeless fan is equipped with a one-hour
sleep timer. To activate, push the sleep timer
button located to the left of the speed dial.
The power light will blink blue while the sleep
timer function is in use. When time is up, the
power light will glow red. If you wish to resume
operation after the timer has run out, push the
sleep timer button again. To shut off the power
light after the timer has run out, turn the speed
dial counterclockwise until the dial clicks and the
light shuts off.
CLEANING AND
MAINTENANCE
Follow these instructions to correctly and safely care
for your fan.
• Always unplug the fan before cleaning.
• Be sure to clean your fan with a soft cloth
moistened with a mild soap solution.
• Do not allow water to drip on or enter into the fan
motor housing.
• Do not use gasoline, thinner, or benzene as a
cleaner.
• Lightly run a vacuum cleaner nozzle over the fan
vents to remove any dust or dirt that may have
accumulated.
• Clean the fan with a soft, damp cloth. Do not
allow the motor or other electrical components to
be exposed to water.
FAN STORAGE
When storing your fan please use the original box. It
is important to keep it in a safe, dry location.
• Store your fan in the original box or an
appropriately sized box.
• Protect the fan vents from dust.
• Store your fan in a dry location.
3