Kenwood KVT-815DVD Manual De Instalación página 9

■ Installation on Toyota Car using Brackets at Holes shown by "¶"
When using the bracket shown above, you cannot use screws at two holes of the right and left unit sides. If so, tighten
the bracket using accessories 0 as shown below.
1. Use accessories 0 at both sides as shown.
Accessory 0
Audio unit or others
2. Mount the bracket at each side.
Accessory -
Screws (included in
audio unit package)
3. Bend each end of accessory 0 to fix the bracket.
Use a flat-blade screwdriver or pliers, and
bend each accessory tab into the hole of
installation bracket to fix the bracket.
or
Bracket
Accessory 0
Accessory -
Screws (included in
audio unit package)
English 9