Operation - American Hometec AHQ-TB32 Manual De Instalación Y Funcionamiento

6. Register the unit for warranty purposes at

OPERATION


The heater supplies hot water at a constant temperature when it is operated
within its designed capacity. The heater automatically adjusts its power
consumption to match the demand of hot water so that you enjoy maximum
energy savings.

Do not block the discharge of the pressure relief valve (if installed)

This unit is designed with safety features to protect against scalding. The following
required information is provided to the consumer:
WARNING! Hot water can produce 3
seconds at 140

The unit is not designed to withstand freezing temperatures during standby.
Attempting to operate the unit while frozen will cause irreversible damage.

A flow rate of > 0.5 gpm is required to enable the unit. Continuous operating
at very low flows can result in damage to the heating mechanism
Figure 6: Sequence of Operation (Scalding Prevention)
o o
F / 60 C and in 30 seconds at 130
www.americanhometec.com
rd
degree burns in 6
o
F / 54
14
o
C