Preparations; General Remarks - Carson SA315 B Lama Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

f. Preparations

General remarks

• If you have no or little experience with airplane models, you
should first practice with a flight simulation program.
• Seek advice from an experienced R/C user for the first few
attempts.
• Acquaint yourself with the control functions of the
transmitter.
• Begin your flight experiments standing behind the model,
the line of sight in the flight direction. In this case, the control
reaction is the same as the direction of control.
Furthermore acquaint yourself with the control of the model as
it comes towards you (side-inverted reaction to the direction of
control)!
Install flight battery
1. Open the battery compartment lid.
2. Insert the battery into the battery compartment.
3. Leave the connecting lead hanging out and then replace the
lid on the battery compartment.
Charging and installation of the airplane
batteries
Always charge the battery outside of the model!
• Connect the battery charger with the battery adapter.
• Plug the plug battery charger in a power socket.
• Connect the battery with the LiPo Balance Charger.
• Make sure that the connector is inserted correctly to avoid a
short circuit.
• Do not cover the battery!
• Connect the LiPo Balance Charger to the power supply's
cable.
LiPo Balance
• Connect the lipo battery's white balance connector to the
Charger
LiPo Balance Charger.
• The battery is fully recharged when the green LED is glowing
constantly.
CARSON SA315 B Lama 1:16
GB
17

Publicidad

Tabla de contenido
loading

Tabla de contenido