Controls And Indicators; Button Operation - Jensen VM9510TS Manual Del Usuario

VM9510TS

CONTROLS AND INDICATORS

Button Operation

1. OPEN
Press the OPEN button (1) to activate the automatic
mechanical system and move the TFT monitor into viewing
position. Press again to close the TFT.
2. WIDE/ PICTURE
Press the WIDE/ PICTURE button (2) to adjust the display
aspect of the picture to one of three settings: Wide, Full,
Normal or OFF. Press and hold to access picture settings.
3. ( )
Press the button (3) to adjust the upward tilt angle of the
screen one step at a time. Press and hold this button to
continuously adjust the upward tilt or picture settings.
4. ( )
Press the button (4) to adjust the downward tilt angle of the
screen one step at a time. Press and hold this button to
continuously adjust the downward tilt or picture settings.
5. DISP
Press the DISP button (5) to display system information on
the screen.
6. VOL/LO/DX
Rotate the VOL/LO/DX knob (6) to adjust the volume. Press
and release to enter and/or confirm audio settings. Press and
hold to activate the Local (LOC) setting.
7. POWER/MUTE
Press the POWER/MUTE button (7) once to turn the unit on.
Press again to mute the volume. Press and hold to turn the
unit off.
8. 1/AUDIO
DVD Mode: Press to select audio language during playback.
TUNER Mode: Press once to play preset radio station
channel 1. Press and hold to store the current radio station in
preset channel 1.
9. 2/SUBTITLE
DVD Mode: Press once to select the subtitle language during
playback.
TUNER Mode: Press once to play preset radio station
channel 2. Press and hold to store the current radio station in
preset channel 2.
4