Controls And Indicators; Button Operation - Jensen VM9311TS Manual De Instrucciones

CONTROLS AND INDICATORS

Button Operation

1. OPEN
Press to activate the automatic mechanical system and move
the TFT monitor into viewing position. Press again to close
the TFT.
2. WIDE/ PIC
Press to adjust the display aspect of the picture to one of
three settings: Cinema, Normal or OFF. Press and hold to
access picture settings.
3. ( )
Press to adjust the upward tilt angle of the screen one step at
a time. Press and hold this button to continuously adjust the
upward tilt or picture settings.
4. ( )
Press to adjust the downward tilt angle of the screen one step
at a time. Press and hold this button to continuously adjust
the downward tilt or picture settings.
5. DISP
Press to display system information on the screen.
6. VOL/LO/DX
Rotate to adjust the volume. Press and release to enter and/
or confirm audio settings. Press and hold to activate the Local
(LOC) setting.
7. POWER/MUTE
Press once to turn the unit on. Press again to mute the
volume. Press and hold to turn the unit off.
NOTE: The VM9311TS features Softmute, which
will allow the volume to increase or decrease
gradually when the MUTE function is activated or
deactivated.
8. 1/AUDIO
DVD Mode: Press to select audio language during playback.
TUNER Mode: Press once to play preset radio station
channel 1. Press and hold to store the current radio station in
preset channel 1.
9. 2/SUBTITLE
DVD Mode: Press once to select the subtitle language during
playback.
TUNER Mode: Press once to play preset radio station
channel 2. Press and hold to store the current radio station in
preset channel 2.
14 26
BAND AS
160 WATTS
24-bit / 192KHz DAC
7-INCH LCD TFT
POWER
6
LO/DX
7 8
6
23
10 10 11 12
9
VM9311TS
5 1
DISP CLOSE
24
4
3
WIDE
2
AUDIO VIDEO INPUT
PIC
VM9311TS
21
EJECT
Push
18
ENTER
SRC
17
20
13 15 25 16 19 22