Operating Instructions; Setting The Temperature Control; Reversing The Door Swing Of Your Appliance - Marshall MF-110-XMC Manual Del Propietário

Tabla de contenido

Publicidad

Operating Instructions

Setting the Temperature Control

• The temperature control panel is located on the upper part of the refrigerator. The first time you turn on the unit,
set the temperature control to "5".
• The range of the temperature control is from position "0" to "5". After 24 to 48 hours, adjust the temperature control
to the setting that best suits your needs. Level 3 is recommended.
• To turn off the refrigerator change the temperature control to "0".
Important Note
Turning the temperature control to "0" position stops the cooling cycle but it
doesn't shut off. If the unit is unplugged, has lost power, or it is turned off,
you must wait 3 to 5 minutes before restarting the refrigerator.
If you attempt to try and restart prior to completion, the unit will not start.

Reversing the Door Swing of Your Appliance

Your refrigerator is built with a reversible door. You have the choice of either opening it from the left or the right side.
In order to reverse the opening direction of your door, please follow these simple instructions.
1) Upper Hinge Cover
5) Down Door Hinge
2) Hinge Fixed Screws
6) Down Door Hinge Screws
3) Upper Hinge
7) Adjustable Foot
4) Adjustable Foot
8) Door
• Remove the hinge cover (1) and unscrew upper hinge screw (2). Remove upper hinge (3).
• Lie the unit down on the floor for support
• Remove the door leg (4 & 7) and unscrew screws (6), remove lower hinge (5).
8
DANGER
CAUTION
65

Publicidad

Capítulos

Tabla de contenido
loading

Este manual también es adecuado para:

Mf-220-xmc

Tabla de contenido