Synchronization - Oase WECS II 2048/DMX/02 Instrucciones De Uso

- EN -
6.4.3

Synchronization

In this window you can setup all Timecode settings for being Timecode Master or Slave. The WECS II
2048/DMX/02 Server supports 3 different Timecode formats: SMPTE (Analog over XLR Connector on
backside), NTC (Nettimecode over Ethernet), SNTC (Syncronorm Timecode over Ethernet). Here you
can also adjust the SMPTE signal volume.
Additionally the WECS II 2048/DMX/02 Server offers the possibility to add an Audio Delay i.e. if your
Audience is to far away from the speakers.
27