Input And Output Configuration - Oase WECS II 2048/DMX/02 Instrucciones De Uso

- EN -
6.4.4

Input and Output Configuration

Setup Network Connection
To be able to connect to your WECS II 2048/DMX/02 Server you need to setup the IP-Addresses one
time. To get access to the Settings of the WECS II 2048/DMX/02 Server you need to Login first:
1. Press on the "Login" Button and use as password "depence" in lower case.
2. Now the "Settings" button will be enabled
3. In the tab "Input and Output Configuration" select "Network Settings"
4. Assign a valid IP address for Shownet and if you also want to use Comnet for running a TeamViewer
application in background, you can also setup an additional IP address for Comnet.
Note that it is always recommend to use static IP addresses instead of using DHCP.
Now, V:PAD should be able to connect to your WECS II 2048/DMX/02 Server as soon as they are in the
same Network.
28