Dvd Setup Menu - JVC KD-AVX1 Manual De Instrucciones

Ocultar thumbs Ver también para KD-AVX1:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Playing a JPEG disc
• It is recommended that you record a file
at 640 x 480 resolution. (If a file has been
recorded at a resolution of more than 640 x
480, it will take a long time to be shown.)
• This System can play only baseline JPEG
files. Progressive JPEG files or lossless JPEG
files cannot be played.
Baseline JPEG format: Used for digital
cameras, web, etc.
Progressive JPEG format: Used for web.
Lossless JPEG format: An old type and rarely
used now.
• If progressive or lossless JPEG files are
played back, a black screen appears. In this
case, stop playback and select a baseline
JPEG file. Note that it may take a long time to
select another file.
Changing the source
• If you change the source, playback also stops
(without ejecting the disc).
Next time you select "DISC" for the playback
source (without activating Dual Zone), disc
play starts automatically.
Ejecting a disc
• If the ejected disc is not removed within
15 seconds, the disc is automatically inserted
again into the loading slot to prevent it from
dust. (Disc will not play this time.)

DVD setup menu

• When the language you have selected is not
recorded on a disc, the original language is
automatically used as the initial language. In
addition, for some discs, the initial languages
settings will not work as you set due to their
internal disc programming.
• While playing (or pausing), you cannot
change these languages.
After you change any of these language
settings, eject the disc and insert it (or another
disc) again so that your setting takes effect.
• When you select "16:9" for a picture whose
aspect ratio is 4:3, the picture slightly changes
due to the process for converting the picture
width.
• Even if "4:3PS [PAN SCAN]" is selected, the
screen size may become
"4:3LB [LETTER BOX]" with some DVDs.
This depends on how they are recorded.
General settings—PSM
• If you change the "Amp Gain" setting from
"High Power" to "Low Power" while the
volume level is set higher than "VOL 30", the
receiver automatically changes the volume
level to "VOL 30".
Other main functions
• If you try to assign a title to a 31st station or
31st disc, "Name Full" flashes on the monitor.
Delete unwanted titles before assignment.
• Titles assigned to discs in the CD changer can
also be shown if you play back the disc on the
receiver.
59

Hide quick links:

Publicidad

Tabla de contenido
loading

Tabla de contenido