Connection Of Printers - Xylem SI Analytics TITRONIC 500 Manual De Instrucciones

Fig. 95
7.3

Connection of Printers

The results, calibration data and methods can be printed on the following media:
• HP PCL compatible printer (A4)
• Seiko DPU S445 (Thermo paper 112 mm width)
• On the USB stick in PDF format
To connect the printers to the burette please use the USB socket. When printing, please check whether the
correct printer is connected. It is not possible to print "HP" printer layouts on a Seiko thermal printer or vice versa.
The printer settings should always be checked and adjusted after changing the printer.
Fig. 96
Fig. 97
Only one printer at a time can be connected, because automatic printer recognition is not supported.
HP PCL is the default setting. If you select "Print PDF", please make sure that a USB stick is connected to the
device.
Chapter 7 – Connection of Analytical Balances and Printers
107